Saab Sport Sedan Concept Black

Youngho Jong is a Korean design student, he taken Saab to looking towards future as sport sedan for 2025 Advanced Warning System Vehicle concept: a rakish, four-door saloon with coupe-like styling. And no headroom, by the looks of it, but that’s a forgivable oversight. More interesting to us, however, is how he used his knowledge of nature and human psychology to come up with a vehicle that isn’t just smart, it’s downright sinister.

With his research showing that 50% of vehicles accidents are caused by carelessness, excessive speed and tailgating, Jong wanted to create a car that would warn other drivers to back off and drive with care.

Saab Sport Sedan Concept Black

There are following the 2025 concept, slits open up in its rear panels revealing amber hazard lights, patches of the car’s skin also darken. The same amber slips are found on the front and sides of the vehicle. Jong took his inspiration from nature’s Fire Salamander, which uses its bright, menacing colours to ward off potential predators.

Jong also mentions that the Saab Sport Sedan Concept Study’s skin is constructed of a soft, impact absorbing material that reduces pedestrian injuries and vehicle damage in collisions. He incorporate sharp edges and the colours red and yellow to further emphasises the possible danger.

Car Seat IBE Concept by Modern Technologi

 

Car Seat IBE Concept by Modern Technologi

Now, you can see photos of Seat IBE Coupe Concept showed at Paris Motor Show. Improvements over the first Seat IBE Concept, which was shown in Geneva earlier this year, include refinements to the design and technology, while the Paris Show car now also sports an interior.

Both exterior and interior are characterised by their focus on key elements, by a clear and precise architecture, by modern technology and by materials that are as high-quality as they are ecological.

Come with measuring in at just 3.83 meters (12.5 ft) in length, it is smaller than Volkswagen’s Scirocco. Utilizing a 75 kw (102 hp) electric drive system, the concept is good for 130 km (81 miles) on a single charge. Acceleration from 0 to 100 km/h (0 to 60 mph) can be achieved in 9.7 seconds.

While its exterior design has been tweaked with a restyled lower fascia and new LED headlamps and tail lights. Furthermore, the car is now finished in a more eye-catching cherry-red color.

Car Seat IBE Concept by Modern Technologi

 

 

Ford Kuga Concept Car

 

Ford Kuga Concept Car

 

Ford preparing the concept version of Kuga crossover and Escape SUV for next year’s Detroit Motor Show. The new compact-sized crossover model will go into production in the second half of 2012 as a 2013 model.

“The Kuga/Escape successor could hit Deutschland’s showrooms as early as March next year and reach other European markets by the second quarter.” Bernhard Mattes said. He is man in charge of Ford’s German factories.

Moving production to the U.S. is another point on Ford’s agenda. It’s likely that the new car will be manufactured in Louisville, Kentucky, while the German factory in Saarlouis will keep the European production of the new Focus.

Ford Kuga Concept Car

 

 

National Corvette Museum Announces 2011 Hall of Fame Inductees

The National Corvette Museum has announced the following inductees to be recognized as part of the 14th Annual Corvette Hall of Fame Ceremony in 2011. Ron Fellows, a champion driver for Corvette Racing, Clare “Mac” MacKichan, a key designer for the first and other early Corvettes, and Ray Quinlan, donor of a 1953 Corvette to the Museum taking the project from an archives facility to museum will be recognized with the highest honor bestowed by the Museum for their contributions to the past, present and future of Corvette.

The 2011 Hall of Fame recipients will be inducted into the Corvette Hall of Fame during a ceremony and banquet on Friday, September 2, 2011. Their induction will take place as part of the Museum’s 17th Anniversary Corvette Celebration festivities September 1-3, 2011.

Corvette Hall of Fame Inductee Ron Fellows’ impressive skill as a driver for the Corvette Racing Team has earned him the respect of Corvette fans everywhere. His 27 wins, three ALMS championships and two wins at the 24 Hours of Le Mans, along with his unprecedented four consecutive "Most Popular Driver" awards from ALMS fans, testify to his track record of success. Although he has not raced for the factory team since 2008, he remains one of the most recognizable, respected and popular personalities to ever represent Corvette's racing heritage. As evidence of his enormous popularity, GM paid tribute to Ron by creating the "Ron Fellows ALMS GT1 Champion Corvette Z06" in 2007.

While he still races in NASCAR events and is tied with Terry Labonte for the most road course wins in NASCAR history, Ron has served as an advisor for the GM/Pratt & Miller factory team and an ambassador for Corvette in general, showing up at races, Corvette Corrals, Corvette functions and charities, often auctioning off passes to the Ron Fellows Driving School for worthwhile causes.

Corvette Hall of Fame Inductee Clare “Mac” MacKichan was instrumental to the design and success of all Chevrolets in the mid-twentieth century. In his position as Chief Designer of the Chevrolet Studio, General Motors Design Staff, he was directly responsible for the design of all of the Corvettes from number one, through the 1950s and early 1960s. It was under his guidance that the 1954 Waldorf Show Corvettes were designed. In addition to his position as Chief Designer for Chevrolet, Mac also served as Director of Design for GM's Adam Opel AG in Germany, and later as Executive in Charge of Advanced Design and Engineering for Design Staff.

While he didn't always work on the Corvette brand, he continued to own one and participate in many Corvette activities - appearing and speaking at car shows and event all over the country. He would even decorate his office with parts of Corvettes that had been thrown away. Mac bought Corvettes and truly loved having a role in the creation and evolution of America’s sports car, even though it was unrecognized due to Harley Earl’s policy of giving credit only to himself, and later to Bill Mitchell. Sadly, Mac passed away but his contributions to the Corvette live on.

Corvette Hall of Fame Inductee Ray Quinlan is probably the first Museum enthusiast, and it's fair to say the Museum might not be where it is today without the support of this NCM Lifetime Member No. 001. When the idea of a Corvette Library & Archives first came about, it was Ray who came forward and said he would donate his 1953 Corvette if the plans would incorporate a Museum... a place to house not only historical documents but also artifacts and cars. Memberships were the sole means of raising money in the early days, and Ray was right there, joining at the beginning.

While Ray owned a number of collectible cars, Corvettes were his passion. He was a member of the Corvette Club of Illinois and active with the National Council of Corvette Clubs and National Corvette Restorers Society. Ray always loved the Museum and all it represented, talking to visitors that were looking at the 1953 on display and sharing with them the history. Today, every visitor passing through the halls of the Museum hears the story of Ray and how his donation started the Museum.

The National Corvette Museum established the Corvette Hall of Fame in 1998 to confer the highest honor and recognition upon the most influential individuals in the history of the Corvette. The award recognizes those who have made significant contributions to their respective fields, each having reached the highest level of accomplishment. Inductees must also reflect the highest standards of integrity and character to positively enhance the prestige of the Corvette and the National Corvette Museum.

Additional information on reserving a spot at the prestigious Corvette Hall of Fame banquet will be available in the coming months via our website at: www.corvettemuseum.org or can be obtained by subscribing to our weekly eNewsletter “NCM eNews” at: http://www.corvettemuseum.org/ncmenews/.

The National Corvette Museum is the ‘Gateway to All Things Corvette’ and a member-driven, 501(c)(3) non-profit foundation. Weekly news on the latest Corvette developments, racing updates, event features and raffles are available by subscribing to “NCM eNews” at: corvettemuseum.org/ncmenews. Dedicated to the mission of celebration, education and preservation, the Museum is open seven days a week, 8 a.m. to 5 p.m. CT - located at Exit 28 on I-65 in Bowling Green, KY.

Good Car Good Girl

2011 Camaro SS X and Corvette Z06X

Dodge may be having all the fun crafting race-ready versions of its Viper, but the designers and enthusiasts employed at General Motors want to remind you they’re not incapable of building some serious race machinery themselves. Witness the Chevrolet Corvette Z06X and Camaro SS X concepts: built in partnership with Pratt & Miller for the 2010 SEMA show, these two show stoppers are GM’s vision of the ultimate track machines.

It’s hard to find fault with the basic premise of a Corvette Z06, but designers simply took the best of the production car while adding features to help it ’round a road course. The Z06X concept is built upon a production 2011 Z06 fitted with both the vaulted Z07 performance package and the CFZ Carbon Fiber option group.

From there, GM added a low-restriction air intake, along with a heavy-duty radiator and an improved cooling system. Engineers also tinkered with the suspension setup, adding mono-ball control arm bushings, adjustable stabilizer bars, and coil-over struts with adjustable camber plates. Brembo carbon-ceramic brake rotors are part of the stock Z07 package, but lightweight racing wheels, finished in a dark hue and capped with Michelin racing rubber, are unique to the Z06X.

That black finish ties well with the Z06X’s exterior design. Although all body parts are essentially stock, GM painted the car in a Icy White Metallic color, adding a black racing stripe and rear fascia, along with red accents. Inside, the Z06X’s interior is gutted of interior trim and insulation, allowing the installation of an SCCA-approved roll cage, fire suppression system, a racing seat for the driver, and a five-point harness. To help further strip the car of weight, the rear hatch glass has been replaced with a custom polycarbonate window.

2011 Camaro SS X Concept
Chevrolet’s Camaro SS X concept abides by the same formula applied to the Z06X, although a few extra modifications were required to help turn the bulky muscle machine into a satisfying road racer.

Outside, the SS X shares the Z06X’s design theme, sporting the same black-on-white paint scheme as its fiberglass-bodied relative. In a move to strip weight, GM replaced the hood, fenders, doors, and deck lid with panels fabricated from carbon fiber. For aerodynamic purposes, a carbon fiber front splitter, rocker panels, and adjustable rear wing were also added to the package.

Underhood, the SS X retains the Camaro’s stock 6.2-liter LS3 V-8, although it’s been massaged with a new camshaft, revised cylinder heads, and a dry-sump oil system. The six-speed transmission is stock Getrag fare, although it is fitted with a twin-disc clutch raided from the Corvette ZR1 parts bin. 20-inch wheels and racing tires are added, and are stopped courtesy of an upgraded four-wheel-brake system, which includes six-piston front calipers, four-piston rear calipers, and slotted rotors at each corner.

As is the case with the Z06X, the Camaro SS X’s interior isn’t exactly conducive for commuting. Carpeting, insulation, interior trim, and other parts — including the rear seat — have been gutted to shave weight and make room for some serious racing hardware. An SCCA-spec roll cage, window net, race seat, and five-point harness are added, along with racing pedals, a fire suppression system, and fuel cell.

Peugeot EX1 concept

On the eve of the of the Paris Motor Show, Peugeot held a private viewing of the EX1 Concept Car at its premier showroom on the Champs Elysees in Paris. The EX1 represents one of Peugeot’s celebrations of 200 years of business, along with the company’s new corporate mantra, “Motion and Emotion”. The EX1 concept proves that an electric powered car does not need to be only a neighbourhood local commuter car, but also an exciting, efficient, and high speed mode of transport.

Its name stands for: E = Electric, X = across four wheels, and 1 = the No. 1 vehicle of its type. The front of the car is charged with smoothing the airflow over its tapered rear half, which reflects the more mechanical attributes of the EX1. In truth, Peugeot introduced similar conceptual architectural layouts in their Asphalt concept from 1996 and the 2006 20Cup Concept.

All of these concepts feature a very narrow rear track, primarily for improved aerodynamics, handling and efficient, minimal packaging. The most significant evolution of this third generation of narrow rear track concepts from Peugeot are is its pair of electric motors, each providing power to either the front or rear wheels.

“The new Peugeot DNA is Motion and Emotion. This is all about efficiency,” explained Gilles Vidal, Peugeot Director of Design. “In the design department at Peugeot, we are pushing towards the reality that ‘electric’ is all about an emotional experience of getting out of the city, and having an exciting time driving”.

The inside tack is that its DRG is a strong hint towards the upcoming 208 supermini’s face. Aside from this, the concept seems to sit slightly ill at ease with Peugeot’s move away from what it describes as a ‘hyper-sporty’ aesthetic. While, after 14 years of similar concepts, there still seems little chance that the company will every commit one to production.

Ferrari 458 Challenge Car Tuning

 

Ferrari 458 Challenge Car Tuning

The 458 Challenge boasts a host of upgrades over its road-legal sibling to make it race worthy when it hits the grid in Ferrari’s one-make race series from 2011. The Ferrari 458 Challenge will make world premiere at the 35th edition of the Bologna Motor Show in Italy, which runs for the public from December 4 to 12.

Ferrari is also displaying a variety of other racing models from the past and present at its Bologna Motor Show stand, including a 430 GTC owned by the AF Corse team Ferrari and an F1 model.

Ferrari’s engineers have made modifications to the gear ratios and calibration of its dual-clutch F1 gearbox to further improve torque at lower revs. While the Challenge keeps the 458 Italia’s direct injection 4.5-liter V8 with an output of 570 hp at 9,000 rpm intact.

 

 Ferrari 458 Challenge Car Tuning

 

Ferrari 458 Challenge Car Tuning  

The Ferrari 458 Challenge is equipped with the E-Diff electronic differential already employed on the road-going version, a first for Ferrari’s track-only cars. Another first for a Ferrari Challenge model is the adoption of the firm’s F1-Trac traction control system. The race-spec model also gets a specific suspension set-up with steel uniball joints, stiffer springs, single-rate alloy dampers and a ride height lowered by 50mm all round.

Stopping power is provided by the new generation Brembo CCM2 brakes integrated with the latest ABS system which debuted on the 599XX, Ferrari’s experimental laboratory car, while it rides on centre-nut 19-inch forged rims wrapped in larger dimension Pirelli slicks.

Result of combined is the improvement of the car’s lap time at Fiorano by two seconds over that of its predecessor, resulting in a new record of just 1’16.5”. According to the Italian company, the amount of lateral grip the new car generates is 1.6G. Read also about this car’s detail at previous post..

Ferrari 458 Challenge Car Tuning

 

 

Top cars for 2011

Bmw M3 coupe wallpaper 2009	Bmw M6 convertible black wallpaper

Toyota Supra Twin Turbo 2010 wallpaper	Honda Acura advanced sports concept 2011

Audi A6 Avant	Audi R8 Tdi Lemans

Lamborghini Gallardo spyder	Lamborghini Reventon Picture

Mercedes Benz Wallpaper	Mercedes clk grand edition interior

Ferrari street car wallpaper	Porsche 911 Turbo

Hummer limousine wallpaper	Dodge Viper GTS R 2000 Sport cars wallpapers

Opel Insignia	Renault Megane tuning

This material was prepared especially for you car enthusiasts are hoping this year 2010 release by the most modern and sophisticated, among the most anticipated releases are cars of various makes and models on the market, stay tuned so you can watch the cars release 2011, the most anticipated of the year.
Prepare a list for you to give the protagonists for launching cars in Usa

MODIFIKASI Audi A8 Razor GTR-10

Houses Modification to modify the total German PPI Automotive Audi R8 V10 to produce performance and special appearances. The more exclusive because the car is named PPI Razor GTR-10 was produced limited.

R8 exterior look sharper thanks to the package body kit, including front bumper, side skirts, rear fenders, rear bumper, rear spoiler and diffuser. Lined hood carbon fiber material and air intake hole. Including the back-coated carbon fiber.
In fact, such as doors, roof pillars, side skirts and front bumper made of genuine carbon fiber. The use of this material can contribute up to 250 kg weight reduction.

The use of carbon fiber also spread up into the cabin. Look at the handbrake lever, door protector panel, some of the dashboard, door trim and center console. The chair also thanks to the use of lightweight carbon fiber.

Automatic, weight reduction also contributed to improved performance. Standard V10 engine has been improved strength to 601 PS (previously 525 PS) and peak torque of 565 Nm (previously 529 Nm). With modifications to the R-Tronic transmission, the ability to accelerate from 0-100 lm / hour getting cut, from 3.9 seconds to 3.2 seconds. Maximum speed is also increased from 315 km / h to 335 km / hour.

Forward the overflow of energy to the highway, four-wheel mounted MAG11 PPI aluminum alloy wheels measuring 9x19 inches in front and 12x20 inches in the rear. Velg wrapped in Michelin Pilot Sport 2, 245/35 19 (front) and 325/25 20 (rear)